Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability. The tinsel wire naturally has less 'give' than the fabric material of the spider leading to asymmetrical spider behavior and non-uniform stress distribution around the spider circumference. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil\/cone position within the framework of a time-domain analysis. To address this, many long-excursion woofers today rely on a simple solution that weaves the lead-wires into the spider (rear suspension) of the driver. (The warranty is not transferable and will not apply to products purchased from unauthorized dealers.)3. These feature variants of the W7 subwoofers, which are powered by JL Audio's amplifier designs combined with A.R.O. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.\u003cbr\u003e\n* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability. JL Audio W3v3 Series Subwoofer Driver. This allows for the inevitable, slight variations in production part dimensions without having them negatively impact the integrity of the suspension and coil-centering at high excursions.\u003c\/p\u003e\u003cimg src=\"https:\/\/embed.widencdn.net\/svg\/jlaudio\/xjaphxobxj\/JLA-VRC-logo.svg?u=fhkrg%20alt=\" vented reinforcement collar width=\"200\"\u003e\u003ch3\u003eVented Reinforcement Collar\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003cbr\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Information:\u003c\/strong\u003e\u003cbr\u003eThe Vented Reinforcement Collar (VRC®) is a composite structure that addresses two issues related to reliability.\u003c\/p\u003e\n\u003cp\u003eBy reinforcing the critical junction between the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weakness. The warranty only applies to the original purchaser from an authorized retailer. As such, longevity becomes a major concern and makes the woven-in design less than ideal for very long-excursion designs.\u003c\/p\u003e\n\u003cp\u003eWhile a traditional 'flying lead' design does not compromise spider linearity or radial stability, it creates its own challenges on a long-excursion woofer. Product owned by anyone other than the original purchaser from an authorized JL Audio dealer. ft. (49.6 l) ported enclosure. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. Lead-wires that are attached or woven into the spider material can alter the spider's \"stretching\" behavior. $32.95. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. JL Audio has done a fine job with the W3v3 line.". ft. (8.5 l) sealed enclosure, or a 0.35 cu. \u003cbr\u003e\u003cbr\u003eSpecifically-designed grille mesh inserts are available separately and fit into the inner diameter of the trim ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful Tip:\u003c\/strong\u003e Installing the grille mesh inserts is much easier before mounting the woofer into the enclosure.\u003c\/p\u003e\u003cimg src=\"https:\/\/embed.widencdn.net\/svg\/jlaudio\/dtw48c0qot\/JLA-ELWS-logo.svg?u=fhkrg%20alt=\" engineered lead-wire system width=\"200\"\u003e\u003ch3\u003eEngineered Lead-Wire System (U.S. Patent #7,356,157) \u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003cbr\u003e Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Information:\u003c\/strong\u003e\u003cbr\u003eManaging the lead-wires on a long-excursion woofer is one of the trickier aspects of its mechanical design. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Wedge™ & MicroSub™ Enclosed Subwoofers, Marine Loudspeakers, Marine Subwoofers and Marine Enclosed Loudspeakers, Home Subwoofers: Dominion™, E-Sub, Fathom® and Gotham®. The benefit is a more precisely built, more mechanically sound loudspeaker. This delivers intensely valuable information compared to traditional modeling, which assumes that the \"fixed\" field produced in the air gap by the magnet and the motor plates is unchanging. This high-performance speaker can exceed this level. This research is aimed at decoding what we refer to as the \"Loudspeaker Genome\"... a project aimed at understanding the true behavior of loudspeakers under power and in motion. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass. * All specifications are subject to change without notice. This subassembly is assembled outside the speaker basket, for optimum alignment and glue-joint integrity. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.\u003cbr\u003e\n* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. This reduces thermal compression effects and enhances reliability.\u003c\/p\u003e\n\u003cp\u003eCurrent versions of the VRC™ also incorporate lead-wire strain relief structures to improve mechanical reliability.\u003c\/p\u003e\u003cimg src=\"https:\/\/embed.widencdn.net\/svg\/jlaudio\/wjxdewpsik\/JLA-IMSA-logo.svg?u=fhkrg%20alt=\" insert molded suspension coil terminal sub-assembly width=\"200\"\u003e\u003ch3\u003eInsert Molded Suspension \/ Coil \/ Terminal Sub-Assembly (U.S. Patent #7,379,558)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003cbr\u003eSpiders, voice coils, terminals and lead wires are preassembled, using a patented process, onto a composite carrier for improved precision and reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Information:\u003c\/strong\u003e\u003cbr\u003eA conventional speaker is assembled in layers. As with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability. Product damaged in an accident, due to criminal activity (attempted theft, gunshot damage, etc.) Product owned by anyone other than the original purchaser from an authorized JL Audio dealer. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.\u003cbr\u003e\n* All enclosure volumes listed above are net internal volumes! This video is of my new system, I have 2 jl audio w3s powered by a 1000 watt kenwood mono amp. The result is flawless high-excursion lead-wire behavior, with outstanding reliability and none of the compromises inherent to a woven-in lead wire system. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.\u003c\/p\u003e\n\u003cp\u003eWhen installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. DMA not only shows that this "fixed" field changes in reaction to the magnetic field created by current flowing through the voice coil, but it helps our engineers arrive at motor solutions that minimize this instability. Return only defective components. Freight damage on returns is not covered under warranty. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Information:\u003cbr\u003e\u003c\/strong\u003eMany speakers employ venting techniques to enhance voice coil cooling. JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Summary:JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. JL Audio acquires Total Mobile Audio as an entry-level line to its dealers. By elevating the frame above the top-plate of the motor (via stand-offs integrated into the bottom of the frame) a narrow, high-velocity air-path is created between the bottom surface of the frame and the top surface of the top-plate. Stay informed about new products and promotions.Sign-up today! $37.98. Managing the 'whipping' behavior of the wire and making sure it does not contact the cone or spider is one challenge. Product owned by anyone other than the original purchaser from an authorized JL Audio dealer. This allows for the inevitable, slight variations in production part dimensions without having them negatively impact the integrity of the suspension and coil-centering at high excursions.\u003c\/p\u003e\u003cimg src=\"https:\/\/embed.widencdn.net\/svg\/jlaudio\/xjaphxobxj\/JLA-VRC-logo.svg?u=fhkrg%20alt=\" vented reinforcement collar width=\"200\"\u003e\u003ch3\u003eVented Reinforcement Collar\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003cbr\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Information:\u003c\/strong\u003e\u003cbr\u003eThe Vented Reinforcement Collar (VRC®) is a composite structure that addresses two issues related to reliability.\u003c\/p\u003e\n\u003cp\u003eBy reinforcing the critical junction between the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weakness. or by 'acts of God' (flooding, lightning, locusts, etc.)8. This is typically accomplished by having big holes in the sides of the frame just below the spider attachment shelf. Product owned by anyone other than the original purchaser from an authorized JL Audio dealer. JL Audio 10W3v3-4 10" 4-Ohm Subwoofer • 500W RMS 10" W3v3 Series Single 4-Ohm Subwoofer • Sensitivity: 84.87 dB • Mounting depth: 5.93 " • Injection-molded mineral-filled polypropylene cone • Nitrile butadiene rubber surround •Customization trim ring • Floating Cone Attach Method • … Product with defaced, altered or removed serial numbers (no valid, legible serial number = no warranty).2. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.\u003c\/p\u003e\n\u003cp\u003eWhen installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. Zong Thao 29,997 views. The tinsel wire naturally has less 'give' than the fabric material of the spider leading to asymmetrical spider behavior and non-uniform stress distribution around the spider circumference. It appears that your cart is currently empty! Detailed Information:Many speakers employ venting techniques to enhance voice coil cooling. (The warranty is not transferable and will not apply to products purchased from unauthorized dealers.)3. While it provides a modest cooling benefit, this low-velocity air-flow does not blow directly or strongly on the voice coil.\u003c\/p\u003e\n\u003cp\u003eOur patented design improves upon this cooling technique in a number of ways. By custom painting it, you can match your installation theme and create a personalized look. The benefit is a more precisely built, more mechanically sound loudspeaker.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cimg src=\"https:\/\/embed.widencdn.net\/svg\/jlaudio\/w5cljmnbja\/JLA-TrimRing-logo.svg?u=fhkrg%20alt=\" customizable trim ring width=\"200\"\u003e\u003ch3\u003eCustomizable Trim Ring\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003cbr\u003eThis removable ring can be painted to match the installation theme and directly receives JL Audio grille mesh inserts (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Information:\u003c\/strong\u003e\u003cbr\u003eThis ABS trim ring is molded in black, but that doesn't mean it has to stay that way. Specifically-designed grille mesh inserts are available separately and fit into the inner diameter of the trim ring. Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date code. JL Audio 10W3v3-2 10" 2-Ohm Subwoofer • 500W RMS 10" W3v3 Series Single 2-Ohm Subwoofer • Sensitivity: 85.37 dB • Mounting depth: 5.93 inches • Injection-molded mineral-filled polypropylene cone • Nitrile butadiene rubber surround •Customization trim ring • Floating Cone Attach Method • DMA Optimized Motor Get FREE 2-day shipping. Product that has not been installed according to the instructions in the owner's manual\u003cbr\u003e5. The result is flawless high-excursion lead-wire behavior, with outstanding reliability and none of the compromises inherent to a woven-in lead wire system. DMA not only shows that this "fixed" field changes in reaction to the magnetic field created by current flowing through the voice coil, but it helps our engineers arrive at motor solutions that minimize this instability. If an enclosure is not firmly attached, it can become a projectile in a collision. The following JL Audio products are built in our Miramar, Florida factory, with global components:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSubwoofers: W7, W6v3, TW5v2, TW3, TW1, W3v3 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosed Car Subwoofers: Stealthbox®, PowerWedge™, ProWedge™, H.O. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.\u003cbr\u003e\n* All enclosure volumes listed above are net internal volumes! When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. Product that has been physically abused (run over by a car or beat with a hammer, for example).\u003cbr\u003e4. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes. DMA not only shows that this \"fixed\" field changes in reaction to the magnetic field created by current flowing through the voice coil, but it helps our engineers arrive at motor solutions that minimize this instability. Summary:JL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. If an enclosure is not firmly attached, it can become a projectile in a collision. DMA is able to analyze the real effects of fluctuating power and excursion upon the magnetic circuit of the motor, specifically the dynamic variations of the "fixed" magnetic field. Note: Products purchased from unauthorized dealers are not covered under warranty.Warranty LimitationsThe following is not covered under JL Audio's warranty program:1. Product in which repair and/or modification has been attempted by unauthorized parties6. Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. Customer is responsible for shipping charges and insurance in sending the product to JL AUDIO. It gets even better when the larger driver delivers additional power handling and excursion. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. This delivers intensely valuable information compared to traditional modeling, which assumes that the \"fixed\" field produced in the air gap by the magnet and the motor plates is unchanging. If you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. Give these a try, people -- I think you are going to like them.\u003c\/p\u003e\u003cp\u003e– Eric Holdaway, \u003cspan style=\"text-decoration: underline;\"\u003eCar Audio \u0026amp; Electronics\u003c\/span\u003e, December 2010\u003c\/p\u003e\u003c!-- split: USER REVIEWS :--\u003e","published_at":"2020-01-03T12:50:24-05:00","created_at":"2020-01-03T12:50:24-05:00","vendor":"JL Audio","type":"","tags":["Car Audio","diameter:8 inch","impedance:4Ω","power:250W","Subwoofers","W3v3","YCRF_car"],"price":22999,"price_min":22999,"price_max":22999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31628553158734,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92148","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"8W3v3-4","public_title":null,"options":["Default Title"],"price":22999,"weight":4545,"compare_at_price":null,"inventory_management":"shopify","barcode":"699440921480"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FLT.jpg?v=1578073824","\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FRT.jpg?v=1579279811","\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-RLT.jpg?v=1579279811","\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-RRT.jpg?v=1578073824"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FLT.jpg?v=1578073824","options":["Title"],"media":[{"alt":"Front of 8W3v3 Subwoofer Facing Left","id":6145356365902,"position":1,"preview_image":{"aspect_ratio":1.081,"height":1500,"width":1622,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FLT.jpg?v=1578073824"},"aspect_ratio":1.081,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FLT.jpg?v=1578073824","width":1622},{"alt":"Front of 8W3v3 Subwoofer Facing Right","id":6145356431438,"position":2,"preview_image":{"aspect_ratio":1.061,"height":1500,"width":1591,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FRT.jpg?v=1578073824"},"aspect_ratio":1.061,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-FRT.jpg?v=1578073824","width":1591},{"alt":"Rear of 8W3v3 Subwoofer Facing Left","id":6145356398670,"position":3,"preview_image":{"aspect_ratio":1.083,"height":1500,"width":1625,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-RLT.jpg?v=1578073824"},"aspect_ratio":1.083,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-RLT.jpg?v=1578073824","width":1625},{"alt":"Rear of 8W3v3 Subwoofer Facing Right","id":6145356464206,"position":4,"preview_image":{"aspect_ratio":1.013,"height":1500,"width":1519,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-RRT.jpg?v=1578073824"},"aspect_ratio":1.013,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0231\/7202\/2350\/products\/8W3v3-RRT.jpg?v=1578073824","width":1519}],"content":"\u003c!-- split: OVERVIEW :--\u003e\u003cp\u003eW3v3 8-inch Subwoofer (250 W, 4 Ω)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eIf you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy.

Kérastase Nutritive Bain Satin 2 Review, Ea81 For Sale, L Oreal Products With Peptides, Which Type Of Beak Duck Have, Svs Pb-1000 Price, Healthy Crouton Recipe, Cerave Sa Cleanser Review, Used Epiphone Mandolin For Sale, Fontana Forni Mangiafuoco Review,